Corrosion and Chemical
Resistant
The rich layer of polyester or vinyl ester resins will protect
the grating panels from a wide range of acids and caustics.
Our high resin content ensures our gratings to perform well
in even the harsh corrosive environments.
Fire Retardant
All our SS molded gratings are made to the standard of Class
I of ASTM E 84 Tunnel Test with flame spread of 25 or less,
and 30 seconds or less burn time per ASTM D 635.
Super-Strong
Due to our unique design, we can lay as much as 42% glass
content in a panel. As most of the strength come from the
reinforcement such as fiberglass, the more fiberglass content,
the stronger the grating is. We can also vary the glass content
according to custom needs. Our in-house tests show our load-bearing
capacity is much higher against other manufacturers' deflection
tables.
Impact Resistant
Due to the integral one-piece structure, especially the
many interwoven layers of fiberglass beneath the grating
surface, grating panels will not deform easily compared
with steel gratings.
Anti-Slip
The naturally formed meniscus or concave surface can provide
adequate slip resistance. We have embedded grit or regular silicon
grit surfaces available for extra slip or fall resistance.
Low Maintenance and Nice Look
Color pigment is blended into the resins all over the grating
panels, there is an uniform color as a whole and will not
need painting at all. By adding anti-UV additive, gratings
can be protected from violet light damage.
Light Weight and Easy Fabrication
Our molded grating is usually 1/3 weight of steel grating,
it is easier to carry around by one or two people during installation
and fabrication. It requires less foundation support and less
heavy equipment to handle.
Non-Magnetic, Non-sparking, Non-Conductive
These build-in features allow our gratings to be used in
various environments where the opposite could be fatal.
|
